Click here for important information regarding your Duralee account.
Both complete beds and wall mount headboards are available. The complete beds include a headboard, foot rail, side rails and slats. They are designed to accept a mattress and box spring. Headboards for full beds are not designed for wall mounting. Wall mount headboards come with bayonet fasteners to be professionally installed to the bed and wall. Please note the overall height of the wall mount headboards. We must be advised of king size mattress widths. 76” or 78”.
General construction begins with a kiln dried hardwood frame machined for durability. Dowel construction is used throughout, along with glue, screws, and corner blocks. The suspension is uniquely determined for each frame for comfort and durability. Deep seated frames are comprised of eight way hand tied coil springs. Other styles utilize premium elastic webbing or sinuous wire springs. The inner fillings are composed of a layer of synthetic fiber batting, a generous portion of urethane foam, and another layer of white synthetic fiber batting. All inner body fillings are hypoallergenic. The outer fillings are made with a fabric does not touch the raw frame as everything is padded. The skirts are hand aligned and cut to the upholstered item to assure an accurate match. The skirts are fully lined and sewn with mitered corners for a natural drape. Our typical skirt height off the floor is one half inch. All skirted items are equipped with levelers in each leg to allow for height adjustment.
All fully upholstered frames are Made in the USA.
Due to the variations of handcrafted upholstered furniture, printed and quoted dimensions are approximate. Differences in fabric, cushion fillings, and each craft person’s techniques can cause some variation from one furniture piece to another. The measurement of seat depth is a guide and is not intended to indicate comfort. All seat dimensions are calculated with Luxury Grade cushioning. Loose back pillow dimensions can fluctuate depending on fill factor and type of fill.
Most fully upholstered items can accept changes in width, depth, or height. Dimensional changes must be quoted by a Duralee Furniture® representative. We will not make any changes to the scale of the item.
Sectional locks are standard on all sectionals. The connectors are fitted, installed, and tested before leaving the factory, for tight joints and accuracy.
Sleepers have a contract Leggett and Platt® mechanism and 5.5” Kingsdown® innerspring mattress. The mechanism has a T.V. headrest, and built-in anti-tilt mechanism that allows a person to sit at the foot of an open sleeper without incident. An Air Dream® Mattress that inflates with an electric pump in less than one minute to a full 11” while still maintaining an innerspring design, is available as an option.